Today's application of the lifting pliers, including the connection of the member one shape of the two symmetrical handles, the handle includes the handle and the forearm, and is set in the front of the forearm slot, then the handle is double, and the two forearms open naturally and the slot end hooks the forearm to put the water tank in the water, in the hole in the hole, the handle is held by both hands, which makes the operation very practical and comfortable. At present, the new model effectively improves the assembly efficiency of the convex water tank, the internal manufacturing and disassembly of the convex water tank.

　　At present, the steel cable of the lifting pliers is arranged at the top of the tower according to the structural arrangement of the top of the tower and the elevation of a set of supports. The reinforced structure is adopted, the pre-processed beam is used as the supporting foundation, the single beam is double divided, the upper surface of the beam is covered with steel plate to strengthen the connection, and the two beams are connected through the steel bar to improve the stability of the lifting pliers. Its 8T winch is used to carry the steel cable to lift several lanes, and can place a set of vehicle-passing supports to drive the main cable, the chair to move into position when lifting the device and the small operating surface used in the installation to overcome the tower construction.

　　A new type of lifting clamp comprising a corresponding lifting clamp defined by a pivot to increase contact with billets or ingot, two arms of the contact area calibrator and a rotating shaft fitted to the sliding bearing arm can be moved relative to the clamping arm to adjust the centre of gravity of the clamping member, and the lifting clamp switch has a triangular moving support chassis. The hydraulic lift fixed in the upper part of the medium fixed base can effectively carry out the lifting process of the switch cabinet, the overall structural cost is low, the production cost is high in terms of practicality.

　　Today, the application of mechanical equipment installation technology field, and understand the lifting pliers, which includes a certain bit member connection and intermediate adapter, which is characterized in that the lower end of the intermediate adapter is connected to the device will be lifted, the solution can improve reliability and safety, and further improve the comfort of adjusting the lifting position.

Next: Design and optimization of a new type of steel plate hoist

Previous: Vertical lifting of heavy lifting pliers such storage and maintenance can "prolong life"